Ebco MS Wardrobe Rail Bracket - Metal Support for Hanging Rods, 1 Set (2 Nos), Nickel Plated, WRF-B2

Product Highlights

• Manufacturer: Ebco
• Product: Wardrobe Rail Fitting - Bracket MS
• Article Code: WRF-B2
• Material: MS (Mild Steel)
• Finish: NP (Nickel Plated)
• Compatibility: Designed for Ebco 30mm x 15mm Oval Wardrobe Rail (WRF-RA-1/2/3)
• Packaging: 1 set
• Application: Supporting hanging rails in wardrobes, closets, and storage systems

Product Description

Ebco Wardrobe Rail Fitting - Bracket MS (WRF-B2) is a nickel-plated mild steel mounting bracket designed specifically for the Ebco 30mm x 15mm Oval Wardrobe Rail (WRF-RA-1/2/3). It mounts to the interior side panels of a wardrobe and holds the oval rail securely in the horizontal position, giving the hanging rail a stable, sag-free support that carries the weight of loaded clothes hangers. The bracket is sized and profiled to match the oval cross-section of the WRF-RA rail series - it will not correctly support other rail sizes or cross-sections.

The nickel-plated finish provides corrosion resistance and a clean, professional appearance that matches the rail's own finish inside the wardrobe. Two brackets are needed per rail - one at each end. For longer rails exceeding 1.5 metres, a centre support bracket should be added to prevent sagging under the weight of a full load of hanging clothes. The bracket fixes to the wardrobe side panel using wood screws - ensure the panel is solid timber or thick plywood (minimum 18mm) for a secure fixing.

Key Features

• Designed for Ebco Oval Rail (WRF-RA-1/2/3): Specifically sized for the 30mm x 15mm oval cross-section - correct fit for the full WRF-RA rail range in both Champagne (AC) and Chrome Plated (CP) finishes
• Mild steel construction: Strong and rigid - holds the rail and full clothing load firmly without flex or movement
• Nickel-plated finish: Corrosion-resistant with a clean, professional appearance that complements the wardrobe interior
• Simple installation: Screws directly to wardrobe side panels - no special tools or fittings required

Technical Specifications

Technical Specifications (Quick Reference)

Installation Guidelines

Step-by-Step Installation

1. Mark bracket positions: Determine the rail height inside the wardrobe and mark the bracket fixing position on both side panels at the same height.
2. Check level: Use a spirit level to confirm both marks are at the same height - an uneven bracket position will cause the rail to slope and clothes to slide to one end.
3. Drill pilot holes: Drill pilot holes at the marked positions to suit your wardrobe panel material - timber or thick plywood requires wood screw pilot holes.
4. Fix the brackets: Screw the brackets firmly to the wardrobe side panels using wood screws appropriate for your panel thickness - minimum 18mm panel recommended for a secure hold.
5. Insert the rail: Seat the Ebco Oval Wardrobe Rail (WRF-RA-1/2/3) into both brackets and verify it is secure and level before loading with clothes.

Recommended Applications

Where the Ebco WRF-B2 Bracket fits best

• Bedroom wardrobes: The primary application - supporting the Ebco Oval Rail in built-in and modular wardrobes for hanging shirts, trousers, dresses, and jackets
• Walk-in closets: Multiple rail runs in walk-in closets where each rail section requires a bracket at each end plus mid-span support for longer spans
• Custom wardrobe projects: DIY and professionally installed wardrobes using the Ebco WRF-RA rail system where correctly matched brackets are required for a complete installation
• Laundry and utility areas: Mounting a hanging rail for air-drying clothes or temporary garment storage using the same Ebco oval rail system

• Authentic Ebco Hardware: Verified genuine products
• Professional Cabinet Solutions: Heavy-duty hardware for long-lasting installations
• Bangalore Fulfilment: Quick local availability

FAQs

1) Which Ebco wardrobe rail does this bracket fit?

The WRF-B2 bracket is specifically designed for the Ebco 30mm x 15mm Oval Wardrobe Rail (WRF-RA-1/2/3) - available in Champagne (AC) and Chrome Plated (CP) finishes. The bracket is shaped to match the oval cross-section of this rail series. It will not correctly fit rails of a different diameter, cross-section shape, or from other manufacturers - confirm your rail is the Ebco WRF-RA series before ordering this bracket.

2) How many brackets do I need per rail?

You need two brackets per rail - one fixed to each end side panel of the wardrobe. For rails longer than approximately 1.5 metres, add a centre support bracket to prevent the rail from sagging under the weight of a full load of hanging clothes. Each bracket is sold as 1 set - order the quantity matching the number of bracket positions in your wardrobe.

3) What screws should I use to fix the bracket to the wardrobe panel?

Use wood screws appropriate for your wardrobe panel material and thickness. For standard 18mm plywood or MDF wardrobe panels, use 4mm x 30mm or 4mm x 35mm wood screws - long enough to grip securely through the bracket and into the panel without penetrating the outer face. If your panel is thinner than 18mm, the fixing will be weaker - consider adding a backing block of thicker timber behind the bracket position for a stronger hold.

4) Can this bracket be used with rails from other brands?

The WRF-B2 is sized for the Ebco 30mm x 15mm oval rail profile. Other brand rails may have different outer dimensions or cross-section shapes - a bracket that does not match the rail profile will not hold the rail securely and can cause it to slip or fall under load. Use Ebco WRF-B2 brackets with Ebco WRF-RA rails only for a correctly matched, safe installation.

5) Does the nickel-plated finish match the Ebco oval rail finish?

The WRF-B2 nickel-plated finish is compatible with both the Chrome Plated (CP) and Champagne (AC) finish variants of the Ebco WRF-RA rail series. Chrome Plated rail with a nickel-plated bracket gives a consistent metallic appearance inside the wardrobe. For the Champagne finish rail, the nickel-plated bracket provides a neutral metallic support that does not visually clash with the warm-toned rail finish.

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details