Hettich Intermat 9956 Corner 165° Zero Protrusion Regular Close Hinges, 0 Crank, 1 Set (2 Nos), 9242890

Product Highlights

• Brand: Hettich
• Product: Intermat 9956 165° Zero Protrusion Regular Close Hinge (Intermat range)
• Variant: 0 Crank – Full Overlay (9242890)
• Opening Angle: 165° – wide access for corner cabinets
• Design: Zero protrusion
• Closing: Regular close (no soft close)
• Cup Diameter: 35 mm
• Maximum Door Size: 900 x 600 mm (35.4" x 23.6") with 2 hinges
• Package Content: 1 pair (2 hinges and 2 mounting plates). Note: installation screws are not provided and must be purchased separately
• Application: Corner kitchen cabinets, L-shaped units and corner wardrobes

Product Description

Hettich Intermat 9956 165° Zero Protrusion Regular Close Hinge is an economical wide-angle hinge from Hettich's Intermat range, designed for corner cabinets that need wide, easy access. Its 165° opening lets the door swing almost fully open, while the zero protrusion design keeps the open door clear of the cabinet opening – so internal drawers and pull-outs can slide out without hitting the door.

It has a regular close action without soft close, making it a cost-effective choice where silent closing isn't needed. It fits a standard 35 mm cup hole, clips onto its mounting plate and can be adjusted for neat door alignment. This 0 Crank (full overlay) version suits doors that fully cover the cabinet side panel – the most common setup in modular kitchens. Each pack contains one pair: 2 regular close hinges and 2 mounting plates. Installation screws are sold separately.

Key Features

• 165° Wide Opening: Maximum access to corner cabinet contents
• Zero Protrusion: Open door stays clear of the opening, so internal drawers and pull-outs work freely
• Regular Close: Simple, reliable action at an economical price
• Clip-On Mounting: Hinge clips onto the mounting plate for easy fitting and removal
• Standard 35 mm Cup: Fits standard European cup holes

Product Specifications Table

Technical Specifications (Quick Reference)

Available Variant

Before You Order

• For Corner Cabinets: Designed for corner and wide-access cabinets – standard cabinets are better served by regular 110° or 95° hinges
• Check Clearance: Make sure there is room for the door to open to 165°
• 0 Crank (Full Overlay): The door fully covers the cabinet side panel
• Hinges per Door: 2 hinges (1 pair) for doors up to 900 x 600 mm
• Screws: Not included – purchase separately

Recommendations & Ideal Use-Cases

Where this fits best

• Corner Kitchen Cabinets: L-shaped and corner base units
• Cabinets with Internal Drawers: Zero protrusion lets pull-outs slide past the open door
• Budget-Friendly Projects: Economical wide-angle corner solution
• Wardrobes: Corner closet units

Installation Guidelines

1. Check Clearance: Make sure the cabinet allows a full 165° opening
2. Drill the Cup Hole: Drill a 35 mm cup hole in the door and fix the hinge
3. Fix the Mounting Plate: Mount the plate on the cabinet side panel in the correct position
4. Clip On: Clip the hinge onto the mounting plate
5. Adjust: Fine-tune the door alignment as needed

Installation by an experienced carpenter is recommended.

FAQs

1) What does zero protrusion mean?

When the door is open, it stays clear of the cabinet's opening instead of swinging into it. This means internal drawers, pull-outs and baskets can slide out freely without hitting the door.

2) Why is a 165° opening useful for corner cabinets?

The wide opening gives much better access to the contents of corner and L-shaped cabinets, where standard hinges don't open far enough.

3) Does it have soft close?

No. Intermat 9956 is a regular close hinge, making it an economical choice for corner cabinets where silent closing isn't needed.

4) What is 0 Crank?

0 Crank (Full Overlay) means the door fully covers the cabinet's side panel – the most common setup in modular kitchens.

5) Are screws included?

No. The pack has 2 regular close hinges and 2 mounting plates. Installation screws need to be purchased separately.

6) Can I use these on standard cabinets?

It is possible, but they are designed for corner and wide-access cabinets. Standard cabinets are usually better served by regular 110° or 95° hinges.

7) What is the difference between Intermat and Sensys?

Sensys is Hettich's premium range with soft close, while Intermat is the economical range with regular close – ideal for budget-conscious projects.

• Authentic Hettich Product: Verified genuine product sourced from authorized Hettich channels
• 60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for active furniture and carpentry projects
• Project-Friendly Availability: Single-pair ordering for door-by-door procurement on residential and commercial projects

Returns & Exchange Policy

1. Return within 72 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details