Jaquar Single Piece Slim Concealed Cistern, S-Type - Floor Mount (JCS-WHT-2400FS)

Product Highlights

• Manufacturer: Jaquar Group ·
• Code: JCS-WHT-2400FS
• Space-saving slim profile: Fully concealed in-wall design hides the tank for a clean, uncluttered bathroom
• Heavy-duty floor-mount frame: Rated to handle structural weight up to 500 kg
• Suits non-structural walls: Load goes to the floor, so drywall, glass and hollow block walls are workable
• Dual flush: 3 litre half flush / 6 litre full flush
• S-type drain with a constant water seal to keep sewer gases out of the bathroom
• Front access panel — service the valves without breaking tiles
• Please note: Flush plate and WC pan are separate purchases — see below

Downloads — Data Sheet

• Jaquar Data Sheet: View the PDF — frame dimensions and wall recess requirements
• Give this to your plumber before first fix. The frame position and the wall recess depth are set then, and neither can be changed once the wall is built and tiled

Product Description

Jaquar Single Piece Slim Concealed Cistern (JCS-WHT-2400FS) is an in-wall flushing system on a floor-mounted frame, with a dual flush mechanism and an S-type drain connection — for a wall hung WC.

The floor-mounted frame is what makes this version useful, and it is worth understanding what it changes. The frame stands on the floor and transfers the load downwards rather than relying on the wall behind it, and it is rated to 500 kg. That makes it the sensible choice where the wall cannot be trusted to carry a suspended load — lightweight drywall, glass partitions, hollow block. The WC itself is still wall hung either way; what changes is where the weight goes.

Being slim matters where wall depth is limited. A conventional concealed cistern needs a deep false wall; a slim cistern achieves the same result in less depth, and in a compact Indian bathroom the depth you do not give up to the wall is floor space you keep.

The dual flush gives a 3 litre half flush and a 6 litre full flush. Over a household's daily use the difference between flushing 3 litres and 6 litres every time is substantial, and it is the single easiest water saving available in a bathroom.

The S-type drain holds a permanent water seal in a curved section of the drain path. That standing water is what physically blocks sewer gases from travelling back up into the room — a trap that dries out is the usual reason an otherwise clean bathroom starts to smell.

And the front access panel is the detail that pays off years later. The flush and inlet valves are the parts that eventually need attention, and the panel behind the flush plate lets a plumber reach them from the front, without breaking tiles.

Important

• Confirm your drain type is S-type before ordering. S-type runs the waste down into the floor; P-type runs it horizontally into the wall. That is fixed by your existing plumbing and cannot be changed without opening the floor or wall
• Test before tiling. Run a full flush test and a pressure leak check on every joint and connection before the wall is closed up. A leak found after tiling is a very different job
• Align the access panel flush to the wall face before tiling, or the actuator plate will not sit correctly and future service access is compromised
• Professional installation required — allow roughly 3 to 4 hours

Key Features

• 500 kg rated floor-mount frame: Load transfers to the floor, so the wall does not have to carry it
• Works with non-structural walls: Drywall, glass partitions and hollow block become viable
• Slim profile: Less wall depth than a conventional concealed cistern — floor space you keep
• Dual flush 3 L / 6 L: The easiest water saving available in a bathroom
• S-type drain with constant water seal: Blocks sewer gases from entering the room
• Front access panel: Valves serviced from the front, without breaking tiles
• Complete installation package: Frame, drain set with seals, supply connections, access panel frame, fixings and manual

Technical Specifications

Technical Specifications (Quick Reference)

Specification	Details
Brand	Jaquar Group
Product Name	Single Piece Slim Concealed Cistern, S-Type
Product Code	JCS-WHT-2400FS
Mounting Type	Floor mount frame (for a wall hung WC)
Drain Type	S-type drain connection
Flush System	Dual flush — 3 litres / 6 litres
Load Capacity	Up to 500 kg
Installation Time	3 to 4 hours — professional installation required
Wall Recess Depth	160–220 mm
In the Box	Slim cistern, mounting frame, S-type drain set with seals and fittings, water supply connections, access panel frame, mounting hardware, installation guide
Not Included	Flush control plate and wall hung WC pan

Measurements

mmcminches

Dimension	Size
Frame size
Width (frame)	556 mm55.6 cm21.9 in
Length / depth (cistern body)	93 mm9.3 cm3.7 in
Height (frame base to flush plate centre)	1025 mm102.5 cm40.4 in
Installation
Wall cavity depth required (back wall to frame front)	160 – 220 mm16 – 22 cm6.3 – 8.7 in
Finished wall thickness in front of frame	20 – 70 mm2 – 7 cm0.8 – 2.8 in
Adjustable leg height (frame base to finished floor)	0 – 200 mm0 – 20 cm0 – 7.9 in
Floor fixing centres (between legs)	460 mm46 cm18.1 in
WC connection
WC mounting bolt spacing	180 / 230 mm18 / 23 cm7.1 / 9.1 in
Waste outlet centre height (from frame base)	220 mm22 cm8.7 in
Waste pipe diameter (with outlet adaptor)	Ø90 mm (Ø110 mm)Ø9 cm (Ø11 cm)Ø3.5 in (Ø4.3 in)
Water inlet	½" BSP

FAQs

1) Why choose the floor mount version?

Because of where the weight goes. The floor-mount frame stands on the floor and transfers its load downwards, rated to 500 kg, rather than relying on the wall behind it. That makes it the safer choice when your walls are non-structural or lightweight — drywall, glass or hollow brick. Note that the WC itself is still wall hung; what changes is how the frame is supported, not the type of pan.

2) What is an S-type drain, and why does it matter?

It is a curved drain path that retains a small standing pool of water, creating an airtight seal between the sewer pipe and your bathroom. That water seal is what physically stops sewer gases travelling back up into the room. Confirm your waste routing is S-type — running down into the floor — before the frame is embedded, because it cannot be changed afterwards.

3) What else do I need to buy?

Two things. A Jaquar flush control plate, which is a separate purchase so the cistern can be finished in any design and finish — we stock it bundled with the Kubix and Alive plates. And a wall hung WC pan, which is also separate and is the most expensive item to overlook. Your plumber will also need connection pipes specific to your layout.

4) How is it serviced once it is hidden in the wall?

Through the front access panel behind the flush plate. The actuator plate removes and the panel gives a plumber direct access to the internal flush and inlet valves — the parts that eventually need attention — without breaking a single tile.

5) Can it be fitted during a renovation?

Yes, but it is not a swap. Because the cistern and frame sit inside the wall cavity, the wall section where the WC will sit has to be opened up. The frame and cistern are installed and fully tested first, and only then is the wall sealed and tiled over — running the flush and leak checks before tiling is essential.

Returns & Exchange Policy

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once installed or used
3. Refer to Refund Policy for complete details

Please check the box contents against the list above on delivery. Note that the flush control plate and WC pan are not included, and confirm your drain type is S-type before the wall is built.

jaquar single piece slim concealed cistern s-type floor mount jcs-wht-2400fs dual flush 3 6 litre 500kg frame wall hung wc access panel bangalore