Fevicol HeatX Heatproof Adhesive

Product Highlights

• Brand: Fevicol (Pidilite)
• Product: Fevicol HeatX Heatproof Adhesive
• Type: Solvent-based synthetic rubber contact adhesive (heat resistant)
• Heat Resistance: Up to 170°C
• Pack Sizes: 500 ml, 1 L, 5 L
• Open (Tack-Dry) Time: 5 – 10 minutes
• Clamping: Not required – bonds on contact
• Full Cure: 24 hours
• Packaging: 01 Nos (Single Pack)
• Application: Kitchen countertops and shutters near hobs and chimneys, sun-exposed furniture, curved and vertical surfaces

Product Description

Fevicol HeatX is Pidilite's heatproof contact adhesive, rated to withstand temperatures up to 170°C. It is made for surfaces near heat sources, such as kitchen countertops near the cooking range, modular shutters near chimneys and furniture exposed to direct sunlight.

As a solvent-based contact adhesive, it is applied to both surfaces, left to dry for 5 – 10 minutes until tacky, then pressed together for an instant grab with no spring-back. No clamps, nails or masking tape are needed, which makes it ideal for vertical and curved surfaces. Available in 500 ml, 1 L and 5 L packs.

Key Features

• Heatproof up to 170°C: Bond holds near hobs, chimneys and in direct sunlight
• Instant Contact Grab: Bonds as soon as the two tacky surfaces are pressed together
• No Clamping Needed: No clamps, nails or masking tape to hold surfaces in place
• Vertical & Curved Surfaces: High grab resists spring-back on curved and upright panels

Product Specifications Table

Technical Specifications (Quick Reference)

Recommendations by Pack Size

Which size to choose

• 500 ml: Small repairs and touch-up jobs
• 1 L: A few kitchen shutters or a single countertop
• 5 L: A full modular kitchen, workshops and contractor projects

Application Guidelines

1. Surface Prep: Clean both surfaces and remove dust and grease
2. Apply to Both Surfaces: Spread a thin, even coat on each surface
3. Let It Go Tacky: Leave for 5 – 10 minutes until the adhesive is dry to the touch but still tacky
4. Press Together: Align carefully and press firmly; it grabs instantly, so position before contact
5. Cure Before Use: Allow 24 hours for full bond strength before applying loads or heat
6. Ventilation: Work in a well-ventilated area and keep away from open flames while applying

FAQs

1) What temperature can HeatX withstand?

Pidilite rates Fevicol HeatX for temperatures up to 170°C, making it suitable for kitchen surfaces near cooking ranges and chimneys, and furniture in direct sunlight.

2) How is HeatX different from Fevicol SH or Marine?

Fevicol SH and Marine are water-based adhesives that soak into the wood and need clamping for hours while they dry. HeatX is a solvent-based synthetic rubber contact adhesive: you coat both surfaces, let them flash-dry, then join them for an instant grab with no clamps, nails or masking tape.

3) How long does it take to set, and when can I use the furniture?

Let both coated surfaces dry for 5 – 10 minutes until tacky, then press together; the bond grabs instantly. Allow 24 hours for full bond strength before putting loads or high heat on it.

4) Can I use HeatX in wet areas or outdoors?

No. It handles normal indoor humidity but is not rated for continuous water exposure or outdoor weather. For bathroom cabinets or outdoor furniture, use Fevicol Marine instead.

5) How do I identify genuine Fevicol?

Genuine Fevicol packs carry proper labelling with batch numbers and manufacturing details.

• Authentic Fevicol Product: Verified genuine product sourced from authorized Pidilite channels
• 60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for ongoing carpentry and interior projects
• Every Pack Size: From 500 ml for small jobs to 5 L for full kitchens

Returns & Exchange Policy

1. Replacement within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once opened or used
3. Refer to Refund Policy for complete details